<< Click to Display Table of Contents >> Navigation:  PERSONA Campus Online > Web Client > Monitor/Command > Status/Commands > Edit Controller

The Edit Controller page allows you to make changes to VertX and EVO names and settings for hardware in your system. These pages can be accessed by clicking on the hardware from the Status Command Page.

On this page, you will see tabs with settings and information about the HID VertX Controller you have selected along with the History tab which ties into the transaction and system audit. 

 

The following are the different types of VertX/EVO hardware that can be used in PERSONA Campus Online: V1000, V2000, Edge, V100, V200, and V300. Each hardware type’s profile in the system might look slightly different but the concepts between all VertX/EVO hardware are the same.

• Location: Name assigned to the hardware
• Hardware Type: Description of what type of hardware is installed
• Door Behavior: If displayed this will determine if the hardware readers are set up as ‘Card In/Free out’ or ‘Card In/Card Out

Settings

• Tamper, AC Power Fail & Battery Fail: Inputs on the controller that can be used to monitor the controller’s physical environment and power status when wired to external sources.
• Encryption: Setting to enable encryption AES encryption between PCO and the controller.
• Time Zone: Time zone setting the controller is set to follow.

Details

• MAC Address: Physical MAC Address of the controller
• Firmware Version: Controller firmware version currently running
• Hardware Server: Name of the server the controller is communicating to
• ControllerUID: ID of the controller in the PCO database
• Program Data: Internal HID program Data
• IP Address: Controllers last known IP address
• Host Name: Internal name entered the hardware upon configuration
• Internal ID: Internal ID value to the controller

History

• Events: Will show events from the selected hardware in the order they occurred. You cannot sort, search, or export from the history tab.
• Commands: see an audit of commands that have been sent to the locks. Ex: Lock, Unlock, Refresh Credentials, etc…
• Changes to Device: An audit of changes that have been made to the controller and any of its settings.